EMC Standard

Here shows a list of international EMC standards related to the products we handle.

ISO

Abbreviation for International Organization for Standardization.　ISO regulates standardized industrial standards to facilitate international trade of goods and services. In addition to the ISO 9000 series of quality system standards and the ISO 14000 series of environmental protection standards, ISO has also issued standards for immunity test methods for automobiles and automotive electronic equipment, and these are used as reference standards in ECE regulations as well as in the standards of various automobile manufacturers.

International Standard Tests	Title
ISO11451-2	Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy, Off-vehicle radiation sources

International Standard Tests	Title
ISO11452-2	Absorber-lined shielded enclosure
ISO11452-3	Transverse electromagnetic (TEM) cell
ISO11452-4	Bulk current injection (BCI)
ISO11452-5	Stripline
ISO11452-7	Direct radio frequency (RF) power injection
ISO11452-8	Immunity to magnetic fields
ISO11452-9	Portable transmitters
ISO11452-11	Reverberation chamber

International Standard Tests	Title
ISO7637-2	Road vehicles — Electrical transient conduction along supply lines only
ISO7637-3	Road vehicles — Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
ISO13766	Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 2 Additional EMC requirements for functional safety

CISPR

CISPR stands for International Special Committeon RadioInterference, a special committee of the IEC (International Electrotechnical Commission). The CISPR standard is referenced in many regions, including Europe, Asia, and Australia, where it has been replaced as a national standard with only a title change.

International Standard Tests	Title
CISPR11	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics – Limits and methods of measurement
CISPR12	Vehicles, boats, and internal combustion engine driven devices Radio disturbance characteristics Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
CISPR14-1	Household appliances, electric tools and similar apparatus Part 1 Emission
CISPR14-2	Household appliances, electric tools and similar apparatus - Part 2 Immunity - Product family standard
CISPR15	Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR25	Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of on-board receivers
CISPR32	Electromagnetic compatibility of multimedia equipment – Emission requirements
CISPR35	Electromagnetic compatibility of multimedia equipment – Immunity requirements
CISPR36	Electric and hybrid electric road vehicles – Radio disturbance characteristics Limits and methods of measurement for the protection of off-board receivers below 30 MHz

IEC

IEC is abbreviation for International Electric Commission. The CISPR standard is referenced in many regions, including Europe, Asia, and Australia, where it has been replaced as a national standard with only the title changed.

International Standard Tests	Title
IEC61000-3-2	Electromagnetic compatibility (EMC) Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase)
IEC61000-3-3	Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
IEC61000-4-2	Electrostatic discharge immunity test
IEC61000-4-3	Radiated, radio-frequency electromagnetic field immunity test
IEC61000-4-4	Electrical fast transient/burst immunity test
IEC61000-4-5	Surge immunity test
IEC61000-4-6	Immunity to conducted disturbances, induced by radio-frequency fields
IEC61000-4-8	Power frequency magnetic field immunity test
IEC61000-4-9	Impulse magnetic field immunity test
IEC61000-4-10	Damped oscillatory magnetic field immunity test
IEC61000-4-11	Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
IEC61000-4-12	Ring wave immunity test
IEC61000-4-13	Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
IEC61000-4-20	Emission and immunity testing in transverse electromagnetic (TEM) waveguides
IEC61000-4-21	Reverberation chamber test methods
IEC61000-4-39	Radiated fields in close proximity - Immunity test
IEC61000-6-1	Immunity standard for residential, commercial and light-industrial environments
IEC61000-6-2	Immunity standard for industrial environments
IEC61000-6-3	Emission standard for equipment in residential environments
IEC61000-6-4	Emission standard for industrial environments

FCC

FCC stands for Federal Communications Commissions, which creates, publishes and regulates standards for EMC in the United States. Not only in the U.S., but also in Canada and South America, it is referenced. FCC CFR 47 is a standard that specifies technical standards for radio frequency equipment or their components. CFR 47 is composed of Parts 0 through 90, with Part 15 for radio frequency equipment, Part 18 for ISM equipment, and Part 2 for general regulations for radio frequency equipment, for example. Within each Part, further subparts are identified.

International Standard Tests	Title
FCC 47_CFR_Part15 subpart B	Unintentional Radiators
FCC 47_CFR_Part15 subpart C	Intentional Radiators

ETSI

ETSI is the abbreviation for European Telecommunications Standards Institute. It is a standardization organization established to develop standard specifications for telecommunications in the European region, and is composed of government agencies, telecommunications carriers, manufacturers, research institutes, and other organizations that manage telecommunications in European countries.

International Standard Tests	Title
EN 301 489-1	Common technical requirements;Harmonised Standard for ElectroMagnetic Compatibility
EN 301 489-17	Specific conditions for Broadband Data Transmission Systems;Harmonised Standard for ElectroMagnetic Compatibility

MIL-STD-461

This is a standard issued by the U.S. Department of Defense (DoD) for the EMC evaluation of munitions products. It defines EMI and EMS across electronic, electrical and electromechanical equipment and subsystems designed or procured for use by DoD activities and agencies, and establishes interfaces for the control of electromagnetic interference (EMI) emission and susceptibility characteristics and associated verification requirements.

International Standard Tests	Title
CE101	Conducted Emissions, Power Leads30Hz to 10kHzSurface Ships/Submarines/Aircraft, Army, Including Flight Line
CE102	Conducted Emissions, Power Leads10kHz to 10MHzSurface Ships/Submarines/Aircraft, Army, Including Flight Line/Aircraft, Navy/Aircraft, Air Force/Space Systems, Including Launch Vehicles/Ground, Army/Ground, Navy/Ground, Air Force
RE101	Radiated Emissions, Magnetic Field
RE102	Radiated Emissions, Electric Field
CS101	Conducted Susceptibility, Power Leads
CS114	Conducted Susceptibility, Bulk Cable Injection
CS115	Conducted Susceptibility, Bulk Cable Injection, Impulse Excitation
CS116	Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power Leads
RS101	Radiated Susceptibility, Magnetic Field
RS103	Radiated Susceptibility, Electric Field

ITU-R

ITU-R is the abbreviation for the International Telecommunication Union Radiocommunication Sector. ITU-R is responsible for the revision of the international rules on radiocommunication, the Radiocommunication Regulations, the study of technical, operational and other issues of radiocommunication, the preparation of recommendations, and the allocation and registration of frequencies.

International Standard Tests	Title
ITU-R M.1177	Techniques for measurement of unwanted emissions of radar systems

RTCA DO-160

RTCA DO-160G stands for Radio Technical Commission for Aeronautics /Development Organization. As a private non-profit organization, RTCA works closely with the Federal Aviation Administration (FAA) and industry experts in the United States and around the world to develop comprehensive recommendations on technical performance standards and the operational environment for utilizing the standards.

International Standard Tests	Title
Section16	Power Input
Section17	Voltage Spike
Section18	Audio Frequency Conducted Susceptibility - Power Input
Section19	Induced Signal Susceptibility
Section20	Radio Frequency Susceptibility (Radiated and Conducted)
Section21	Emission of Radio Frequency Energy

UN/ECE R10

It is the EMC standard of the United Nations Economic Commission for Europe for vehicles and electronic equipment used on the road.

International Standard Tests	Title
ECE R10 Revision5	Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

CONTACT

We are happy to hear about your requests other than those mentioned above.
Also, we have expertise in high-frequency, microwave, and millimeter-wave measurements other than EMC, and we can help you with more than just what is listed on our home page.

Please feel free to contact us for a free product introduction and useful materials.

Other Information

A further inquiries are fowarded as below.