Electromagnetic Interference Device

Let us introduce the testing equipment necessary for emission testing, carefully selected from around the world.

EMI Test Receiver

EMI test receiver ESW

Rohde＆Schwarz

The flagship EMI test receiver, the ESW is fully compliant with CISPR16-1-1 and comes standard with FFT-based time domain scanning. The latest option allows FFT bandwidth expansion up to 970 MHz (coming in Q4 2022). Very high dynamic range performance enables accurate measurements without distortion.

EMI test receiver ESR

Rohde＆Schwarz

ESR is fully compliant with CISPR16-1-1 for full compliance testing and features a broadband architecture. It provides high-speed measurements for EMI evaluation and includes a variety of analysis and diagnostic features such as spectrogram display, real-time spectrum analysis, and IF analyzer functions.

EMI test receiver ESRP

Rohde＆Schwarz

ESRP EMI Test Receiver is designed for precompliance measurements for diagnostic determination during development and in preparation for final certification testing.

Antenna

Hybrid Antenna (Bi-log Antenna)

Schwarzbeck / ETS Lindggren / Com Power

Horn Antenna

ETS Lindgren　／　A.H.Systems　／　Schwarzbeck　／　A-INFO

LISN・AMN・Artificial Mains Network

Three-phase V-LISN for industrial equipment

Schwarzbeck

LISN Measuring Phase Remote Control Unit

Techno Science Japan

This unit remotely controls the switching of the line (coupled phase) to be measured in the pseudo power supply network (LISN/AMN) for noise terminal voltage measurement. The can be connected to a PC for software-controlled automatic switching, or it can be remotely controlled by a dedicated infrared remote controller.

LISN for in-vehicle equipment testing

Schwarzbeck

Comb Generator

Techno Science Japan

TG series, our original comb generator for daily check. Ideal for daily check of measurement paths. Output level stability of ±2dB (TG-R2, TG-C2) Equipped with an active wire indicator light for safety Short delivery time and super low price

Comb Generator

York EMC Service

This is ideal for daily checks as well as EMC testing and evaluation of measurement systems and shielding effectiveness of filters and cables. CNEIII is also used for comparative studies of research measurement environments.

Spectrum Analyzer

Rohde＆Schwarz

R&S offers a wide range of spectrum analyzers, from low-cost yet powerful handheld models to high-spec models supporting up to 85 GHz. All spectrum analyzers are designed by R&S RF experts and offer exceptional signal integrity, high value, and superior reliability.

Outdoor Spectrum Analyzer

AARONIA

Extremely durable spectrum analyzer Designed for use in rain, any temperature, dust and dirty environments, so this can be used for aerospace, mining, construction and military purposes as well. Robustness certifications: MIL-STD- 810G, IP65, MIL-STD- 461F Magnesium alloy case Impact-resistant removable hard drive

Handheld Spectrum Analyzer

Aim TTI

Handheld Spectrum Analyzer Compact and lightweight body: 560 grams Battery operation up to 8 hours Setting mode: Center frequency + span, start frequency + stop frequency Setting resolution: 1 kHz Phase noise: -90dBc/Hz @ 100kHz offset @500MHz Number of markers: 1, 2 or none Marker resolution: 0.1kHz

Other EMI products

Near-field Probes Set

LANGER

All near-field probes have an easy-to-use design and are ideal for measuring high-frequency electromagnetic fields on printed circuit boards and components. A variety of probe tips with different shapes are available for various near-field measurement operations.

Current Probe I-Prober 520

Aim TTi

IMAGE pen-type probe and touches PCB board directly to measure current flow. Can be used with most oscilloscopes.

Low Noise Preamp MLA Series

Techno Science Japan

Collaboration of a low-noise power supply and a high-gain/low-noise figure module provides optimal specifications for EMI measurements.

Harmonics and Flicker Test System

The PPA55x1 series is a full compliance harmonic flicker analyzer from Newton4Th (N4L), an ISO17025 (UKAS) certified manufacturer. In addition to IEC/EN61000-3-2 and 3-3, the series also supports testing of high currents exceeding 16A (IEC/EN61000-3-11 and 3-12) and the Japanese standard JIS C 61000-3-2.

CONTACT

We are happy to hear about your requests other than those mentioned above.
Also, we have expertise in high-frequency, microwave, and millimeter-wave measurements other than EMC, and we can help you with more than just what is listed on our home page.

Please feel free to contact us for a free product introduction and useful materials.

Other Information

A further inquiries are fowarded as below.

Electromagnetic Interference Device

EMI Test Receiver

EMI test receiver ESW

EMI test receiver ESR

EMI test receiver ESRP

Antenna

Monopole Antenna

Biconical Antenna

Loop Antenna

Hybrid Antenna (Bi-log Antenna)

Log-periodic Antenna

Conical Spiral Antenna

Horn Antenna

LISN・AMN・Artificial Mains Network

General-purpose 50Ω V-LISN

Three-phase V-LISN for industrial equipment

LISN Measuring Phase Remote Control Unit

LISN for in-vehicle equipment testing

Comb Generator

Comb Generator

Comb Generator

Spectrum Analyzer

Spectrum Analyzer

Outdoor Spectrum Analyzer

Handheld Spectrum Analyzer

Other EMI products

Near-field Probes Set

High Impedance Probe

Current Probe I-Prober 520

Current Probe

Low Noise Preamp MLA Series

EM clamps

Harmonics and Flicker Test System

CONTACT

Other Information